Performance Curve - RIL-200TSW

Description

The ProVent Series of in-line mixed-flow fans have been specifically designed for ducted supply or exhaust air applications.
There are 6 models in the range matching standard duct sizes from 100 to 200mm diameter.

Features

High performance mixed-flow Impeller.

Models 150SW and 200SW include an external mounted 2-speed switch.

Models 150TSW and 200TSW include a 1-30 minute adjustable run-on timer and external mounted 2-speed switch.

Fans can be removed for maintenance or repair without disturbing the duct system via specially designed support brackets.

Integrated mounting foot makes installation easier.

All models include plug and lead for easy installation.

Can be mounted in any position.

Construction
The housings are of reinforced, injection moulded polypropylene plastic.
The mixed-flow impellers are of injection moulded plastic.

Motors
Type - 2-speed, squirrel cage, capacitor run.
Electricity supply - 230V, single-phase, 50Hz.
Class B insulation, IP44.
Bearings - sleeve for RIL-100 and RIL-125, ball for all other models.
Speed-controllable using VA type speed controller in high speed setting only.
The RIL-150TSW and RIL-200TSW cannot be speed controlled.

Internal Thermal Protection
By fuse to size 125 and for all other models manual-reset thermal overload protection device in accordance with mandatory requirement for in-duct fans AS/NZS60335-2-80:2004

Testing
Air flow to ISO5801:Part1, 1997
Noise to BS848:Part 2, 1985
Meets requirements of AS/NZS60335-2-80:2004

Special Note
Timer models RIL-150TSW and RIL-200TSW include a plug and lead to suit HPM 4 pin socket.
Avoid the use of spring-loaded backdraft dampers, extensive lengths of duct and air valves with the RIL-100 and RIL-125 models.

Suggested Specification

The in-line fans shall be of the ProVent Series as supplied by Fantech Pty Ltd and be of the model numbers shown on the schedule/drawings.

Impellers shall be of mixed-flow design and driven by a single-phase motor. Internal thermal protection shall be by fuse on 100 and 125mm spigot models and by manual-reset on 150 and 200mm models.

It shall include an integral mounting foot, plug and lead and specially designed support brackets to enable motor removal.
All fans shall be fully tested to ISO5801: Part1, 1997 for air flow and BS848:Part 2, 1985 for noise.

Technical Data - RIL-200TSW

Setting	Speed [rps]	Avg. dBA @ 3m	kWatts (Input)	Amps	Max.°C	Approx. Weight [kg]
Lo	33	42	0.1	0.45	60	4.9
Hi	42	47	0.12	0.5	60	4.9

Sound Data

Setting	Type	63	125	250	500	1K	2K	4K	8K
Hi	Inlet	53	58	61	64	64	65	59	52
Hi	Outlet	72	62	62	64	68	67	62	54
Hi	Breakout	46	54	52	49	52	53	43	33
Lo	Inlet	48	53	56	59	58	60	54	47
Lo	Outlet	67	57	56	59	63	62	57	49
Lo	Breakout	41	49	47	43	47	48	38	28

Dimensions

A	B	C	D	E	F	G	H	J
124	94	141	100	302	198	220	251	265
124	94	141	100	302	198	220	251	265

*All dimensions in mm, unless otherwise stated

Wiring Diagram

Diagram shown is for single-speed only.
For 2-speed and special motors, contact Fantech for details.

GetOleDbReader:Data Execute Error:Object reference not set to an instance of an object.