Gamma Ultra EC Supply – GUDEC56S

The Gamma Supply Ultra EC Series of mixed-flow roof units can be used for supplying fresh air to an air handling unit or to an air conditioning system. They incorporate the latest state of the art, energy saving EC motor technology and are most efficient where conditions vary during the course of the day.

They feature integrated infinitely variable speed control and eliminate the need for external VSDs, current overloads and motor phase protection.

The Gamma Supply Ultra EC Series is a simple “plug and play” system which means installers do not need to have specialised control programing knowledge.

Matching sensors can easily be connected to monitor the ambient conditions in a space and provide real time feedback to the fan. The fan’s on-board microprocessor can adjust the speed and therefore modulate the ventilation rate to match the specific requirements of the area.

They are available in 3 sizes extending from 450 to 560mm diameter.

• Robust, lightweight construction.
• EC motor features reverse polarity protection, locked rotor
• protection and soft start.
• No additional protection such as contactors are required.
• All motor sizes can be pre-configured to suit specific sensors and specific applications, and are supplied standard with 0-10V control input.
• A full range of sensors are available including differential pressure, humidity, temperature, air velocity and pollutant.
• Can be run as an independent ventilation source or integrated into most building management systems.
• High performance mixed-flow impellers fitted.
• Can be mounted at angles up to 30°

Type - electronic commutated (EC) motor.
Electricity supply
- 200-277V single-phase, 50/60Hz for 450mm size.
- 380-480V three-phase, 50/60Hz for 500 and 560mm
sizes.
Bearings - sealed-for-life, ball.
Integrated EC Controller providing infinite speed control.

Type - electronic commutated (EC) motor.
Electricity supply
- 200-277V single-phase, 50/60Hz for 450mm size.
- 380-480V three-phase, 50/60Hz for 500 and 560mm
sizes.
Bearings - sealed-for-life, ball.
Integrated EC Controller providing infinite speed control.

Can be pre-configured to suit specific sensors and specific applications. Please advise Fantech of these parameters at the time of order.

EC motors should be directly connected to their appropriate AC supply. EC motors should not be regularly power cycled.