EDM Series – EDM-100S
Location Designation
Project Notes
EDM Series
Description
The EDM Series can be wall or ceiling mounted and is suitable for exhausting stale and moist air from homes, town houses and commercial buildings. Available in models to suit 100, 125 and 150mm duct sizes. The EDM-100 is also available in a 12V model suitable for caravans and mobiles homes.
Features
  • Includes a high quality mechanical backdraft shutter that prevents outside air entering building when fan is switched off (except EDM-100S, EDM-200S and EDM-300S models)
  • The EDM-100 is also available in a 12V model suitable for caravans and mobiles homes
  • ‘CT-4PL’ Range - Includes 8 minute run-on timer, shutters, and 4 pin plug and lead. Model EDM-200 only.
  • ‘12V’ Unit - Suitable for wet areas (IPX7): requires a low-voltage transformer. Model EDM-100S-12V only.
  • All models can be used to exhaust along a short length of duct. It is essential allowances be made for pressure losses in the duct to ensure air flows will meet the requirements of the application.
  • 300 model features a slim line body.
  • Grille can be easily removed for cleaning.
  • All models, except the EDM-100S-12V, feature a pilot lamp.
  • Class B motor, IP44 rated.
  • Not speed controllable.
  • Includes a high quality mechanical backdraft shutter that prevents outside air entering building when fan is switched off (except EDM-100S, EDM-200S and EDM-300S models)
  • The EDM-100 is also available in a 12V model suitable for caravans and mobiles homes
  • ‘CT-4PL’ Range - Includes 8 minute run-on timer, shutters, and 4 pin plug and lead. Model EDM-200 only.
  • ‘12V’ Unit - Suitable for wet areas (IPX7): requires a low-voltage transformer. Model EDM-100S-12V only.
  • All models can be used to exhaust along a short length of duct. It is essential allowances be made for pressure losses in the duct to ensure air flows will meet the requirements of the application.
  • 300 model features a slim line body.
  • Grille can be easily removed for cleaning.
  • All models, except the EDM-100S-12V, feature a pilot lamp.
  • Class B motor, IP44 rated.
  • Not speed controllable.
Construction
All units have weather and impact resistant housings.
Motor
Type - shaded-pole induction motor.
Electricity supply - single-phase 230V, 50Hz
Bearings - Ball
Maximum ambient temperature - 40°C
Class II insulation, IP44 rated*.
*The EDM-100 12V has Class III insulation, IP57.
Testing
Air flow to ISO5801:1997
Noise to BS848:Part 2, 1985

Technical Data - EDM-100S

Speed [rps]Avg. dBA @ 3mkWatts (Input)Amps Max.°C Approx. Weight [kg]
41340.0130.1400.48

 

EDM Series – EDM-100S
Suggested Specification
The wall/ceiling fans shall be of the EDM Series as supplied by Fantech Pty Ltd and be of the model numbers shown.
 

Dimensions

ABCD
155989855

*All dimensions in mm, unless otherwise stated

Contacts



OFFICES & AGENTS

Victoria
Fantech Pty. Ltd.
Tel:+61 (03) 9554-7845

New South Wales
Fantech Pty. Ltd.
Tel:+61 (02) 8811-0400

Uniair Distributors Pty. Ltd.
Tel:+61 (02) 4961-6088
Refrigeration and Air Supplies
Tel:+61 (02) 4226-5133

South Australia
Fantech Pty. Ltd.
Tel:+61 (08) 8294-0530

Queensland
Fantech Pty. Ltd.
Tel:+61 (07) 3299-9888
Capricorn Air Conditioning
Tel:+61 (07) 4775-5222

Northern Territory
Fantech Pty. Ltd.
Tel:+61 (08 ) 8947-0447

Western Australia
Systemaire Pty. Ltd.
Tel:+61 (08) 9209-4999

Tasmania
Major Air Pty. Ltd.
Tel:+61 (03) 62736455

ACT
Idealair Group Pty. Ltd.
Tel:+61 (02) 6280-5511

Auckland
Fantech (NZ) Ltd.
Tel:+64 (09) 444-6266

Christchurch
Fantech (NZ) Ltd.
Tel:+64 (03) 379-8622

Wellington
Fantech (NZ) Ltd.
Tel:+64 (04) 566-0532