• Quiet DC motor that can be operated in forward or reverse.
• Comes with optional 18-watt dimmable LED light that can be capped if not required (included in kit).
• Pre-balanced for smoother, low noise operation
• Comes standard with a 5cm and 23cm drop tube
• Wireless controller for speed adjustment, light dimmer option and management of multiple Stingray sweep fans up to 25 metres radius of the controller.

• Quiet DC motor that can be operated in forward or reverse.
• Comes with optional 18-watt dimmable LED light that can be capped if not required (included in kit).
• Pre-balanced for smoother, low noise operation
• Comes standard with a 5cm and 23cm drop tube
• Wireless controller for speed adjustment, light dimmer option and management of multiple Stingray sweep fans up to 25 metres radius of the controller.

The sweep fans shall be of the Hunter Stingray Series as supplied by Fantech Pty Ltd and be of the model numbers shown on the schedule/drawings.

Impeller blades shall be made of molded ABS and feature a contour aerofoil design. They shall include a powder coated steel drop tube that does not require guide wires.

The sweep fan shall use a single phase DC motor that generates large amounts of torque while operating at slow speeds and is equal to or less than 0.03 kilowatts.

It will come with a wireless controller designed to manage multiple sweep fans within a 25 metre radius of the controller. The controller shall adjust fan speed, change the fan rotation direction from forward to reverse and switch optional, LED light integrated models on and off when required.

All models shall be fully tested to AMCA Standard 230-15 for air flow.