The Hunter RM series High Volume, Low Speed (HVLS) is specially designed for hassle-free and cost saving installations. Engineered with a direct drive motor and single phase input, the RM comes with a pre-wired drop tube that uses a self-levelling and a quick connect mounting system

They are available in 3 sizes, 2400, 3000 and 3600mm diameter.

• Energy efficient and compact, single phase direct drive permanent magnet motor.
• Blades are formed with a unique twist profile for each individually fan size to maximise air flow and minimise noise levels.
• Time saving plug-n-play system includes pre-installed bolts, pre-wired rigid drop tube
• Pre-aligned mounting bracket and I-beam clamp.
• Highly efficient 4 blade configuration.
• Comes with a pre-configured proprietary VSD.
• 1/1 analogue controller with basic speed control in forward or reverse.

• Energy efficient and compact, single phase direct drive permanent magnet motor.
• Blades are formed with a unique twist profile for each individually fan size to maximise air flow and minimise noise levels.
• Time saving plug-n-play system includes pre-installed bolts, pre-wired rigid drop tube
• Pre-aligned mounting bracket and I-beam clamp.
• Highly efficient 4 blade configuration.
• Comes with a pre-configured proprietary VSD.
• 1/1 analogue controller with basic speed control in forward or reverse.

The High Volume, Low Speed (HVLS) fans shall be of the Hunter RM Series as supplied by Fantech Pty Ltd and be of the model numbers shown on the schedule/drawings.

Impeller blades shall be made of extruded aluminium and shall feature a contour and twist design. They shall include a powder coated quick-connect rigid drop tube that does not required guide wires.

The HVLS fan shall use a single phase direct drive, permanent magnet motor that generates large amounts of torque while operating at slow speeds and is equal to or less than 0.5 kilowatts.

It will come with a 1/1 controller that switches the fan on and off, adjust fan speed and changes the fan’s rotation direction from forward to reverse.

All models shall be fully tested to AMCA230-15 and AMCA 230-99