41 / 416
© FANTECH
2016
A-19
A
WALL, WINDOW & CEILING MOUNTED FANS
COMPACT 2000 EC SERIES
The Compact 2000 EC Series of square plate axial fans
incorporates the latest state of the art EC motor technology.
They feature integrated infinitely variable speed control and
eliminate the need for external VSDs, current overloads and
motor phase protection. They are an energy saving solution
and are most efficient when air flow requirements vary during
the course of the day.
Optional matching sensors monitor the conditions and provide
real time feedback to the fan's on-board electronics.
This processes the data and in turn adjusts the motor speed.
This modulates the ventilation rate to match the specific
requirements of the area.
The Compact 2000 EC fans are a simple "plug and play" system
which means installers do not need to have specialised control
programming knowledge. The series is available in 4 sizes
ranging from 250 to 630mm diameter.
Typical Applications
Suitable for general ventilation applications in commercial and
light industrial environment such as switch rooms, data centres,
food storage, substations and cleanroom applications.
Features
O
EC motor features reverse polarity protection, locked rotor
protection and soft start.
O
No additional protection such as current overloads
are required.
O
All models supplied standard with 0-10V control input.
Diameter sizes 500mm and above can be pre-programmed
to suit specific sensors and specific applications.
O
A full range of sensors are available including differential
pressure, humidity, temperature, air velocity and pollutant.
O
Can be run as an independent ventilation source or
integrated into most building management systems.
O
Robust galvanised steel construction with polyester epoxy
finish.
O
Low noise, high performance impellers with enhanced
aerodynamic design.
O
Guard is incorporated as standard.
O
Units are light weight and can be mounted at any angle.
O
Capable of operating at temperatures up to 70ºC.
Construction
The square plate is manufactured from galvanised steel with a
high quality polyester epoxy finish as standard.
Impellers are of high performance composite material.
Motors
Type - electronic commutated (EC) motor.
Electricity supply - 200-277V single-phase, 50/60Hz or
380-480V three-phase, 50/60Hz
Bearings - sealed-for-life, ball.
See page
O-7
for details on motors.
Integrated EC-Controller providing infinite speed control.
IP44 rating.
DESCRIPTION
Internal Thermal Protection
Integral thermal overload protection is supplied as standard.
Testing
Air flow tests to ISO5801: 2007
Noise tests to BS848:Part 2, 1985
Wiring Diagram
Scan the QR code on page
A-21
to view wiring diagrams online.
Special Note
Diameter sizes from 500mm and above can be pre-programmed
to suit specific sensors and specific applications. Please advise
Fantech of these parameters at the time of order.
EC motors should be directly connected to their appropriate
AC supply. EC motors should not be regularly power cycled.
SUGGESTED SPECIFICATION
The square plate wall mounted axial fans shall be of the Compact
2000 EC Series as designed and manufactured by
Fantech Pty Ltd and be of the model numbers shown on
the schedule/drawings.
The axial impellers shall be made from high performance
composite material. They shall be driven by an EC-DC external
rotor motor with integrated EC-Controller and integral thermal
protection. Diameter sizes from 500mm and above shall be
pre-programmed to suit the selected sensors and the required
applications. Square plates shall be galvanised steel with a
polyester epoxy finish.
All models shall be fully tested to ISO5801:2007 for air flow
and to BS848:Part 2, 1985 for noise.
HOW TO ORDER
ANCILLARY EQUIPMENT
Controllers & Sensors
Ref. Section M
WSK - Backdraft shutter
Ref. L-8
DCV-CU - Premium Module
on-board control pack
Ref. Section M-18
DG - Finger Guards
Ref. J-9