Heritage EC Series – CHDEC45DD
Performance Curve - CHDEC45DD
Description
The ECOtronic Heritage Series of vertical exhaust roof units
has been designed for use in ducted exhaust applications.
It combines a high-performance centrifugal fan with an IE6*
rated electronically Commutated (EC) shaft motor that delivers
ultra-energy efficient operation with the benefit of in-built
variable speed control.
Available in 6 sizes ranging from 315 to 560mm diameter
* Future IE6 level of efficiency, considering 20% less losses than IE5
according to IEC TS 60034-30-2 for variable speed electric motors.
Features - EC motor features reverse polarity protection, locked rotor protection and soft start
- Can be run as an independent ventilation source or integrated into most building management systems
- Windband can be easily removed to allow easy access for cleaning and maintenance
- Can be remote speed controlled with either a 2-10V, 4-20mA, or frequency duty cycle 10-95% (80Hz, 10-24Vpk)
- Can be manually speed controlled by pressing 2 internal motor buttons
- ECOtronic fans are not designed for hazardous or high temperature conditions
- Maximum operating speed can be limited
- Motor is mounted out of the airstream
- Can be mounted at angles up to 15°
ConstructionRobust, yet lightweight galvanised steel construction.
Impellers are a backward-curved centrifugal design
Windband is fitted with quick-release toggle clamps
to facilitate cleaning and maintenance.
Stainless steel construction is an optional extra
Motor
Type - electronic commutated (EC) motor.
Electricity supply - 200-277V single-phase 50/60Hz
and 380-480V three-phase 50/60Hz.
Bearings - sealed-for-life, ball.
IP55 rating
Internal Protection
Integral thermal overload protection is supplied as standard.
Testing
Air flow tests to ISO5801: 2007
Noise tests to ISO3744: 2010
Special Note
EC motors should be directly connected to their appropriate
power supply. EC motors should not be regularly power cycled.
Suggested Specification
The ECOtronic Heritage Series of vertical exhaust centrifugal
roof ventilators shall be as designed and manufactured by
Fantech Pty Ltd.
The cowl shall be of galvanised steel unless specified otherwise.
Impellers shall be backward-curved centrifugal design and
driven by an EC shaft motor with
The windband shall incorporate quick-release toggle clamps
to provide easy access for cleaning and maintenance
All models shall be fully tested as a complete assembled unit
to ISO5801: 2007 for air flow and ISO3744: 2010 for noise.
Technical Data - CHDEC45DD
| Speed [rps] | Avg. dBA @ 3m | kWatts (Input) | Amps | Max.°C | Approx. Weight [kg] |
|---|
| 25 | 58 | 1.5 | 2.92 | 60 | 49 |
Sound Data
| Type | 63 | 125 | 250 | 500 | 1K | 2K | 4K | 8K |
|---|
| Inlet | 85 | 83 | 78 | 75 | 69 | 70 | 70 | 66 |
Dimensions
*All dimensions in mm, unless otherwise stated
Ancillaries
