110 / 416
DUCT MOUNTED FANS
B
© FANTECH
2016
B-50
DESCRIPTION
ADJUSTABLE PITCH AXIAL FLOW FANS
O
AP Series - direct-drive
O
APV Series - direct-drive vertical mounted
O
APS Series - direct-drive smoke-spill
O
APB Series - belt-drive
O
BFA Series - bifurcated, direct-drive
The AP Series of axial flow fans is available in an extensive range
of variants and air flow performance. They can be manufactured
to handle most conditions from ambient air to hot, corrosive or
explosive gases and can be ordered in 13 sizes extending from
315 to 2000mm diameter.
Typical Applications
Commercial and industrial supply or exhaust air applications
such as shopping centres, office buildings and car parks,
through to industrial processes and equipment ventilation.
Smoke-spill Applications
The APS Series has been tested to meet the air performance
and high temperature test requirements of Standards
AS/NZS1668.1:1998 and AS4429:1999; both tests are
mandatory.
For advice on smoke-spill wiring requirements refer to the
above Standards.
See page
C-8
for details of the smoke-spill range available.
Hazardous Fume Applications
AP Series fans can be made to accommodate requirements for
corrosive fume and explosion risk applications. Special coatings
and alternative materials, such as stainless steel, are available
as well as increased safety motors and anti-static impellers.
Our sales engineers are able to assist with requirements,
which must be specified at time of quotation.
Features
O
Standard casings are made of durable hot-dipped
galvanised steel or pre-galvanised steel.
O
Casings with special coatings such as epoxy paint can be
supplied.
O
Casings of stainless steel or other materials can be
supplied.
O
Ability to select a fan with a specific impeller pitch angle
ensures selections can be made accurately to the
specification.
O
All impellers are adjustable pitch aerofoil section.
O
Impeller materials range from GRP (standard), aluminium,
nylon and anti-static.
O
Casing designs for direct-drive, belt-drive, smoke-spill and
bifurcated applications are available.
O
Can be supplied with motors to meet Ex e, Ex d, Ex nA and
Ex tD Standards.
O
Available in the following variants: