350 / 416
M-20
© FANTECH
2016
EC CONTROLLERS
GND A GND
1 2
+Ub
Input
10...24 V DC
(I max = 6 mA)
+
Output
0...10 V
(I max = 0.3 mA)
+
10...24 V DC
+
p
V PI
R i
01
0 = Setpoint1
1 = Setpoint2
WIRING DIAGRAM
Model Number
Measuring Range
Mount Type Protection Class
Dimensions, mm
DCV-CU-CPG-200AV
0-50 / 100 / 150 / 200 Pa Wall
IP54
114W x 108H x 56D
DCV-CU-CPG-1000AV
0-200 / 300 / 500 / 1000 Pa Wall
IP54
114W x 108H x 56D
0-10V EC SPEED CONTROLLER
DESCRIPTION
The manually adjustable, 0-10V speed
controller has been specially developed
for stepless speed adjustment of EC fans
that accept a 0-10V control signal. It is
available as a wall mount switch plate
and a standalone controller for mounting
on or near the fan enclosure.
Features
O
Quick and easy to install.
O
Incorporates an enable/disable switch.
O
EC fans with integrated speed control
can be activated directly.
Note
The 0-10V speed controller is designed
for 10VDC only. It requires a 10V (25mA)
power supply.
Model Number
Max. mA Mounting
Dimensions, mm
DCV-POT10K-WM
25
Recess
72W x 117H x 40D
DCV-POT10K-FM*
25
Standalone
110W x 35H x 135D
WIRING DIAGRAM
Ground
Signal
10V
Ground
Analogue In
10V Supply
E. C Fan
DESCRIPTION
The differential pressure controller (non-aggressive gas) can be
configured with four measuring ranges. Depending on the desired
set point value and control range, the sensor control module generates
0-10 V to control the EC fan.
Features
O
Quick and easy to install and commission
O
Pre-set parameters control the fan's speed in proportion
to demand
O
24V supply from control unit
O
Digital input (10-24V DC) for switch over between Set point 1
and Set point 2 (e.g. for day / night, summer / winter)
TECHNICAL DATA
*The DCV-POT10K-FM is designed to be mounted on or near the fan enclosure.
CONTROLLERS, VSD, SENSORS & RUN-ON TIMERS
TECHNICAL DATA
Wall mounted
Standalone
PRESSURE CONTROLLER
M