80 / 416
JETSTREAM FAN
®
SERIES
DUCT MOUNTED FANS
B
© FANTECH
2016
In-line fans shall be of the JetStream Fan
®
type as designed
and manufactured by Fantech Pty Ltd.
All models shall be fully tested to ISO5801:1997 for air flow and
to BS848:Part 2, 1985 for noise.
All models shall meet the mandatory requirements of
AS/NZS60335 Parts 1 & 2-80 for safety as well as
AS/NZS 60335.2.80:2004 for manual-reset thermal overload
protection.
q
V
- Volume Flow, m /s
3
P
S
F
- Fan Static Pressure, Pa
0
0.04
0.08
0.12
0.16
0
50
100
150
200
250
JCE152-1
JCE152-3
JCE152-1 /JCE152-3
JCE152-3
System
Lines
29
39
47
= Avg. dB(A) @ 3m
Mid Speed
JCE152-3
Low Speed
High Speed
Unit performance is the
same with or without the
Smooth Flow Backdraft
Damper
q
V
- Volume Flow, m /s
3
P
S
F
- Fan Static Pressure, Pa
0
0.05
0.1
0.15
0.25
0
50
100
200
250
300
JCE202-3
= Avg. dB(A) @ 3m
0.2
Low Speed
Mid Speed
26
34 50
System
Lines
High Speed JCE202-3
Unit performance
with the Smooth Flow
Backdraft Damper
SUGGESTED SPECIFICATION
HOW TO ORDER
B-20
The JetSream Fan
®
Series features a slim-line, duct mounted
centrifugal fan that can fit into areas where space is limited.
When combined with the unique Smooth Flow Backdraft
Damper, with its ultra-low pressure loss, air flow is maximised
while noise generation is minimal. There are five models in
the range.
Typical Applications
Exhausts from bathrooms, ensuites, toilets, laundries, kitchen
hoods, and clothes dryer venting.
Features
O
The JetStream Fan
®
is available in the following models:
JCE152-1 150mm single-speed fan.
JCE152-1SJK 150mm single-speed fan with
smooth flow backdraft damper.
JCE152-3 150mm 3-speed fan with integrated switch.
JCE152-3SJK 150mm 3-speed fan with integrated switch
and smooth flow backdraft damper.
JCE202-3
200mm 3-speed fan with integrated switch.
O
High performance Slim-line design to optimise air flow
and pressure performance and to enable mounting in
restricted spaces.
O
Snap-Fit Mounting Bracket absorbs vibration and is simple
to install.
O
3-pin plug and lead is a standard fitting.
O
Low pressure loss Smooth Flow Backdraft Damper can be
supplied as an optional extra.
O
Can be mounted in any position.
Construction
Housing is of a robust, injection moulded engineering plastic.
Fans are backward-curved centrifugal mounted on an external
rotor motor.
Motors
Type - external rotor, squirrel cage induction motor.
Electrical supply - 230V, single-phase, 50Hz.
Bearings - sealed for life, ball.
Maximum ambient - 50 °C.
Motor protection - IP44.
Models JCE152-1 and JCE152-1SJK are speed-controllable
using electronic controller.
See pages
O-2/3
for details on these motors.
Internal Thermal Protection
Manual reset thermal overloads comply with the mandatory
requirements of AS/NZS60335.2.80:2004 for in-duct fans.
Testing
Air flow tests to AS ISO5801:1997
Noise tests to BS848:Part 2, 1985
Meets requirement of AS/NZS 60335.2.80:2004
DESCRIPTION