Performance Curve - GUEEC28V

Description

The Gamma Ultra EC Series of Mixed-Flow roof mounted exhaust fans incorporates the latest state of the art, energy saving EC motor technology. They feature integrated infinitely variable speed control and eliminate the need for external VSDs, current overloads and motor phase protection.
The Gamma Ultra EC Series is a simple "plug and play" system which means installers do not need to have specialised control programing knowledge.
Matching sensors can easily be connected to monitor the ambient conditions in a space and provide real time feedback to the fan. The fan's on-board microprocessor can adjust the speed and therefore modulate the ventilation rate to match the specific requirements of the area.
Models come in vertical discharge configurations and are available in 280-630mm fan sizes

Features

EC motor features reverse polarity protection, locked rotor protection and soft start.
No additional protection such as contactors are required.
All models supplied standard with 0-10V control input.
Diameter sizes 400mm and above can be pre-configured to suit specific sensors and specific applications.
A full range of sensors are available including differential pressure, humidity, temperature, air velocity and pollutant.
Can be run as an independent ventilation source or integrated into most building management systems.
Robust and lightweight construction.
Compact, low profile design.
Designed for downflow or vertical exhaust applications.
Can be mounted at angles up to 30°.

Construction
Cowls are UV-stabilised plastic.
Impellers are Mixed-Flow design and made from high performance injection moulded composite material. Steel components have a corrosion resistant finish.
Bird-mesh guards are fitted as standard to both downflow and vertical exhaust models

Motors
Type - electronic commutated (EC) motor.
Electricity supply
- 200-277V single-phase, 50/60Hz for 280 to 450mm sizes.
- 380-480V three-phase, 50/60Hz for 500, 560 and 630mm sizes.
Bearings - sealed-for-life, ball.
Integrated EC-Controller providing infinite speed control.

Internal Thermal Protection
Integral thermal overload protection is supplied as standard.

Testing
Air flow tests based on ISO 5801
Noise tests based on ISO 13347-3

Special Note
Diameter sizes from 400mm and above can be pre-configured to suit specific sensors and specific applications. Please advise Fantech of these parameters at the time of order.
EC motors should be directly connected to their appropriate AC supply. EC motors should not be regularly power cycled.

Suggested Specification

The roof ventilators shall be of the Gamma Ultra EC Series vertical exhaust type as designed and manufactured by Fantech Pty Ltd and be of the model numbers shown on the schedule/drawings. Impellers shall be made from high performance injection moulded composite material. They shall be Mixed-Flow design and driven by EC external rotor motors with integrated EC Controller and integral thermal overload protection. Diameter sizes from 315mm and above shall be pre-configured to suit the selected sensors and the required applications.
The windband shall be of the vertical exhaust design and manufactured from UV-stabilised plastic. Steel components shall be corrosion protected.
All performance data shall be for a complete assembled unit to ISO5801 for air flow and ISO 13744-3 for noise.

Technical Data - GUEEC28V

Speed [rps]	Avg. dBA @ 3m	kWatts (Input)	Amps	Max.°C	Approx. Weight [kg]
34	52	0.29	1.45	60	9

Sound Data

Type	63	125	250	500	1K	2K	4K	8K
Inlet	75	68	76	69	67	64	60	56
Outlet	77	72	79	76	71	71	65	60

Dimensions

A	B	C	D	E	F	G
310	410	75	500	575	350	334

*All dimensions in mm, unless otherwise stated

Wiring Diagram

Diagram shown is for single-speed only.
For 2-speed and special motors, contact Fantech for details.

Ancillaries

CBD-B Backdraft Shutters	Temp Sensors	Pressure Sensor	Velocity Sensor	Pressure Sensor
Humidity Sensor