Vogue Series (Reverse Flow) – VCW304R

Performance Curve - VCW304R

Description

The Vogue series of modern ceiling/wall mounted fans is suitable for domestic, commercial and light industrial applications. It includes quick fitting swing locks that keep the fan in place in suspended ceilings or plasterboard walls and ceilings, while extra holes are provided for fixing to brick or concrete.

Construction
The fan housing is manufactured from ABS plastic. The grille can be easily cleaned while installed, or readily removed by taking out the screw and giving the grille a simple twist and pull.

Motors
Type - external rotor, squirrel cage induction motor.
Electricity supply - 220-240V, single-phase, 50/60Hz.
Bearings - sealed-for-life, ball.
Speed-controllable.
Motor protection IP44.
If flameproof motors are required, refer to Compact Flameproof Series - Square Plate Fans for full selection information.

Internal Thermal Protection
Auto-reset type fitted as standard on all sizes.

Testing
Air flow tests to ISO5801:2004
Noise tests to BS848:Part 2, 1985

Special Features
Reverse air flow can be provided; add the suffix ‘R’ to fan code and derate performance by approximately 20%.
Can be mounted at any angle.
Suitable for exhaust or supply through ductwork with use of the optional duct adapter.

Suggested Specification

The fans shall be of the Vogue Series designed and manufactured by Fantech Pty. Ltd.

The axial impellers shall be direct-driven by speed-controllable external rotor motors with integral thermal protection.

The impellers shall be manufactured from galvanised steel with a powder coat finish.

All models shall be fully tested to ISO5801:2004 for air flow and BS848:Part 2, 1985 for noise.

Technical Data - VCW304R

Sound Data

Type	63	125	250	500	1K	2K	4K	8K
Inlet	60	64	64	61	64	62	55

Dimensions

A	B	C	D	E	F
398	371	115	297	310	355

*All dimensions in mm, unless otherwise stated

Ancillaries

VA2.0 Electronic Speed Controller