210 / 416
PROFILE FAN SERIES
ROOF MOUNTED FANS
D
© FANTECH
2016
D-64
The roof ventilators shall be of the Profile Fan Series as designed
and manufactured by Fantech Pty Ltd.
The axial or centrifugal impellers shall be direct-driven by
speed-controllable external rotor motors with integral thermal
protection.
Plastic components shall be UV-stabilised and steel components
shall have a corrosion resistant finish.
All models shall be fully tested as a complete assembled unit to
BS848:Part 1, 1980 for air flow and BS848:Part 2, 1985 for noise.
VA - Speed controller
Ref. M-5
IS30P - Inlet Spigot
Ref. D-65
CC - Attenuator
Ref. H-16
FC - Fast clamp
Ref. J-5
VZ- Run-on timer
Ref. M-14
PF
PF - Profile Fan
A - Axial impeller
C - Centrif. impeller
Fan diameter in cm
Fan speed, no. of poles
D - Centrifugal exhaust, downflow
E - Axial exhaust, downflow
Roof Profile required
T - Trimdek*
C - Custom Orb
D- Spandek
K - Klip-Lok 406
K700 - Kilp-Lok 700
*
*
*
*
B900 - Brownbuilt 900
†
S - Axial supply, downflow
* Registered trade mark of Bluescope Steel Limited
† Available in New Zealand only
For Relief Air Vents specify
PFR30
, see page
D-10
for details.
SUGGESTED SPECIFICATION
HOW TO ORDER
ANCILLARY EQUIPMENT
DESCRITION
The Profile Roof Fan has been developed to reduce the
installation costs of roof mounted units by eliminating the need
for an upstand. They are simple to install, require no additional
flashing and are available in most metal-deck profiles.
There are 2 sizes in the range and these fans are available with
axial flow and backward-curved centrifugal impellers.
Typical Applications
Exhausts and supplies air to a wide range of commercial
applications such as change rooms, laundries, warehouses
and workshops, gymnasiums, bulk’ goods retail outlets
and assembly halls.
Features
O
Available with high pressure backward-curved centrifugal
impellers and high air flow axial impellers.
O
Axial version available as supply or exhaust unit, centrifugal
version available in exhaust only.
O
Easy to install by simply cutting hole in roof and fixing fan
with tek-screws.
O
No need for costly upstands and flashing.
O
To weather proof simply add a bead of silicon around
metal-deck and roof.
O
Inlet spigot available for ducted installations.
O
Fits onto most metal-deck profiles. See
"How To Order”
for complete range.
O
Lightweight but sturdy construction.
O
Can be mounted at angles up to 30
o
.
O
A Relief Air Vent is also available (model PFR30),
See page D-10
.
Construction
Cowl, base and inlet spigot are made of UV-stabilised plastic,
steel components have a corrosion resistant finish. Includes
either axial flow or backward-curved centrifugal impellers.
Motors
Type - external rotor, squirrel cage induction motors
Electricity supply - 230V, single-phase, 50/60Hz
Bearings - sealed-for-life, ball
Speed-controllable
See pages
O-2/3
for details on these motors
Internal Thermal Protection
Internal Thermal Contacts as standard
Testing
Air flow tests to BS848:Part 1 1980
Noise tests to BS848:Part 2, 1985